Powerflex Black -puslasarja - Volkswagen Caddy Mk2 Typ 9K (1997-2003)

Tuotenumero
PFVO5953-BK
Sarjan hinta sisältää aina yhteen autoon tarvittavan määrän puslia

1. PFF85-201BLK
Front Wishbone Front Bush 30mm
Bush size: 30mm
1. PFF85-201GBLK
Front Wishbone Front Bush 30mm Camber Adjustable
Bush size: 30mm
2. PFF85-204BLK
Front Wishbone Rear Bush
3. PFF85-205-20BLK
Front Anti Roll Bar Bush 20mm
Bush size: 20mm
3. PFF85-205BLK
Front Anti Roll Bar Mount 18mm
Bush size: 18mm
4. PFF85-208-10BLK
Front Eye Bolt Mounting Bush 10mm
Bush size: 10mm
4. PFF85-208BLK
Front Eye Bolt Mounting Bush
5. PFF85-209-20BLK
Front Anti Roll Bar Eye Bolt Bush 20mm
Bush size: 20mm
5. PFF85-209BLK
Front Anti Roll Bar Eye Bolt Bush 18mm
Bush size: 18mm
6. PFF85-250BLK
Front Cross Member Mounting Bush
9. PFF85-231BLK
Non Power Steering Rack Mount
9. PFF85-232BLK
Power Steering Rack Mount
Bush size: 18.5mm wide bracket
9. PFF85-233BLK
Power Steering Rack Mount
Bush size: 15mm wide bracket
10. PFR85-1410BLK
Rear Leaf Spring Bush
11. PFF85-239BLK
Front Strut, Top Mount
20. PFF85-280BLK
Front Lower Engine Mounting Bush & Inserts


Katso alta lisätiedot
Alkaen 19,00 €

Toimituskulut kirjeille 3 €, paketeille 6 €.
Yli 130 € tilaukset toimituskuluitta!

Osa variaatioista varastossa

Powerflex-puslat Caddy Models

Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön

LISÄTIEDOT


1. PFF85-201BLK
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
1. PFF85-201GBLK
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%.
2. PFF85-204BLK
If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203.
4. PFF85-208-10BLK
Bushes fit eye bolt mounting either side of where it passes through the wishbone. PFF85-208-10 is suitable for links with a 10mm diameter shaft which uses an M8 nut to hold the bushes in position. A lot of the pattern replacement links are now coming with the 10mm shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models.
4. PFF85-208BLK
PFF85-208 is suitable for links with a 12mm diameter shaft with a 19mm nut. For 10mm shafts use PFF85-208-10. Not Suitable For VR6 - Models and GT Models with chassis codes AAA, AGG & AKR (VW Vento).
5. PFF85-209BLK
Not Suitable For VR6 Models
9. PFF85-232BLK
This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm
9. PFF85-233BLK
This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234.
11. PFF85-239BLK
VW Corrado Does not fit G60 Model. Fits VR6 (ABV) models from chassis 50_N 000 001 and all other models from chassis 50-S-000 052. Seat Cordoba - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards. VW Golf Mk3 Fits models from 1992 to 1996 with 5 stud wheels only, this includes GTi, GTi 16v & VR6. From 1996 to 1998 they fit all Mk3 Golfs. VW Vento - Fits models from 1992 to 1996 with 5 stud wheels only. From 1996 to 1998 they fit all models. Seat Toledo - Fits 1992-1999 models with chassis number 1L-TR000 001 onwards. Seat Ibiza 6K - Fits models from 1993 to 1999 with chassis numbers 6K-TR-080 001 onwards, 6K-ZR-082 401 onwards and 6K-ZR-599 965 onwards.
20. PFF85-280BLK
PFF85-280 is a replacement bush kit that includes inserts that are designed to fit into voids in the bush, allowing tune-ability of engine movement, perfect for stiffening mounts ahead of track days and performance events. This part replaces OE numbers: 1H0199609 K,E,F,B,J,G & J. - On the VW Corrado & Passat the mount will only fit models with the V6 engine.
Write Product Query