Powerflex Black -puslasarja – Alfa Romeo 147 (2000-2010), 156 (1997-2007), GT (2003-2010)

Tuotenumero: PFAL32-BK

Alkaen 45,00

Valitse puslasarja *

Toimitusaika 1-3 arkipäivää

Toimitusaika 2-3 viikkoa

Toimitusaika 2-3 viikkoa

Toimituskulut kirjeille 3 €, paketeille 7 €.
Yli 130 € tilaukset toimituskuluitta

Sarjan hinta sisältää aina yhteen autoon tarvittavan määrän puslia

1. PFF1-811BLK
Front Lower Wishbone Front Bush
2. PFF1-812BLK
Front Lower Wishbone Rear Bush
4. PFF1-810-22BLK
Front Anti Roll Bar Bush 22mm
Bush size: 22mm
4. PFF1-810-23BLK
Front Anti Roll Bar Bush 23mm
Bush size: 23mm
4. PFF1-810-24BLK
Front Anti Roll Bar Bush 24mm
Bush size: 24mm
4. PFF1-810-26BLK
Front Anti Roll Bar Bush 26mm
Bush size: 26mm
5. PFF1-815BLK
Front Upper Arm Bush
6. PFR1-816BLK
Rear Suspension Front Arm Bush
7. PFF1-807BLK
Front Shock Lower Bush
8. PFR1-818BLK
Rear Tie Bar to Hub Bush
9. PFR1-819-14BLK
Rear Anti Roll Bar Bush 14mm
Bush size: 14mm
9. PFR1-819-16BLK
Rear Anti Roll Bar Bush 16mm
Bush size: 16mm
17. PFR1-817BLK
Rear Suspension Rear Arm Bush
20. PFF1-820BLK
Engine Mount Engine To Stabilizer Bush
21. PFF1-821BLK
Engine Mount Stabilizer To Chassis Bush
21. PFF1-822BLK
Engine Mount Stabilizer To Chassis Bush
25. PFR1-825BLK
Rear Trailing Arm Front Bush
PFF1-813BLK
Engine Mount Stabiliser Bush *V6 Only*

Katso alta lisätiedot

Powerflex-puslat 147 (2000-2010), 156 (1997-2007), GT (2003-2010)

Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön

LISÄTIEDOT

1. PFF1-811BLK
We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-811 with the more popular 19mm bore sleeve, but we have seen wishbones with 20mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
2. PFF1-812BLK
We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
4. PFF1-810-24BLK
Please check anti-roll bar diameter before ordering.
4. PFF1-810-26BLK
Fits Eibach Sports Anti Roll Bars
5. PFF1-815BLK
These bushes should be fitted with the supplied metal washers which are to be fitted on the large Top Hat face of the bush. Always check suspension alignment after fitting POWERFLEX bushes.
9. PFR1-819-14BLK
Please check anti roll bar diameter before ordering
9. PFR1-819-16BLK
Please check anti roll bar diameter before ordering
20. PFF1-820BLK
Fits 1.6 to 2.0 petrol 145, 146, 147, 156, GTV(916) & Spider(916) models and V6 166 models.
21. PFF1-821BLK
Fits Alfa 147 & 156 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa 145 & 146 1.4, 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa GTV & Spider (916) 1.8 & 2.0 16v models with extruded bracket.
21. PFF1-822BLK
Fits Alfa 147 & 156 2.0 16v Twin Spark & JTS models with welded steel bracket only. Fits Alfa 145 & 146 2.0 16v Twin Spark & 2.0 16v Quadrifoglio models with welded steel bracket only.
. PFF1-813BLK
Fits V6 Models Only