1. PFF3-501GBLK – Front Wishbone (Cast) Front Bush 45mm Camber Adjustable
This bush features a CNC-machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201GBLK.
OEM Part Number: Bush = 8N0407182A / 8N0 407 182 A
OEM Part Number: Arm = 8N0 407 151 D / 8N0407151D / 8N0 407 152 D / 8N0407152D
OEM Part Number: Arm = 8N0 407 165 / 8N0407165 / 8N0 407 166 / 8N0407166
1. PFF85-201BLK – Front Wishbone Front Bush 30mm
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
OEM Part Number: 357407182
OEM Part Number: 191407182
1. PFF3-501BLK – Front Wishbone (Cast) Front Bush 45mm
For the smaller 30mm bush, please use part no. PFF85-201
OEM Part Number: Bush = 8N0407182A / 8N0 407 182 A
OEM Part Number: Arm = 8N0 407 151 D / 8N0407151D / 8N0 407 152 D / 8N0407152D
OEM Part Number: Arm = 8N0 407 165 / 8N0407165 / 8N0 407 166 / 8N0407166
1. PFF85-201GBLK – Front Wishbone Front Bush 30mm Camber Adjustable
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501.
OEM Part Number: 357407182
OEM Part Number: 191407182
2. PFF85-414BLK – Front Wishbone Rear Bush (Track/Race)
This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use.
OEM Part Number: 1J0407181
OEM Part Number: 8N0407181
2. PFF3-610BLK – Front Wishbone (Cast) Rear Bush
Fits the Cast Front Wishbone.
OEM Part Number: Bush = 1J0 407 181 / 1J0407181 / 8N0 407 181 B / 8N0407181B
OEM Part Number: Arm = 8N0 407 151 D / 8N0407151D / 8N0 407 152 D / 8N0407152D
OEM Part Number: Arm = 8N0 407 165 / 8N0407165 / 8N0 407 166 / 8N0407166
2. PFF85-410PABLK – Front Wishbone Rear Bush, Pattern Arm
This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK
OEM Part Number: 1J0407181
OEM Part Number: 1J0407151C
2. PFF85-410BLK – Front Wishbone Rear Bush
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK.
OEM Part Number: 1J0407181
OEM Part Number: 1J0407151C
3. PFF85-411-23BLK – Front Anti Roll Bar Mount 23mm
Please check anti roll bar diameter before ordering.
OEM Part Number: 1J0 411 314 T
OEM Part Number: 1J0411314T
3. PFF85-411-21BLK – Front Anti Roll Bar Mount 21mm
Please check anti roll bar diameter before ordering.
OEM Part Number: 1J0 411 314 R
OEM Part Number: 1J0411314R
4. PFF85-413BLK – Front Anti Roll Bar Link Bush Kit
Fits plastic link rods only, for aluminium link rods use PFF85-412. Not for link rods with ball joints on the ends.
OEM Part Number: 1J0411315K
OEM Part Number: 1J0411315H
4. PFF85-412BLK – Front Anti Roll Bar Link Bush Kit
Fits metal link rods only. For plastic link rods, use PFF85-413. These parts will not fit link rods with ball joint ends.
OEM Part Number: Bush = 1J0411327 / 1J0 411 327
OEM Part Number: Link = 1J0411315 / 1J0 411 315 G
5. PFR85-610BLK – Rear Beam Mounting Bush
Fits 2WD models only. PFR85-415 has been superseded with PFR85-610.
OEM Part Number: 1J0501541B / 1J0501541C / 1J0501541D
OEM Part Number: 6R0501541A / 6R0501541B / 6R0501541C
OEM Part Number: 6Q0501541E / 6Q0 501 541 E
7. PFF85-416BLK – Steering Rack Mount Bush
OEM Part Number: 1J0422884A
8. PFF85-420BLK – Front Engine Mount Dog Bone (Motorsport)
Made in our hardest Black 95A material, this product is best suited to Track / Motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 1J0199851
OEM Part Number: 1J0199851AM
9. PFF85-505BLK – Lower Engine Mount Small Bush
OEM Part Number: 1J0199851
OEM Part Number: 1K0199855
11. PFF85-430BLK – Front Strut Top Mount Bush
OEM Part Number: 1J0412331C
11. PFF85-431BLK – Front Strut Top Mount Bush -10mm
This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430BLK.
OEM Part Number: 1J0412331C
24. PFF85-424BLK – Front Subframe Rear Bush
OEM Part Number: 1J0199429
OEM Part Number: 8N0199282C
OEM Part Number: 8N0199282D
40. PFF85-440BLK – Upper Engine Mount Insert
PFF85-440BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits:
•tSharper throttle response
•tMore accurate gear changes
•tReduced wheel-hop
•tImproved Traction
•tProlonged mount life
OEM Part Number: 1JO 199 282 BF
41. PFF85-441BLK – Upper Gearbox Mount Insert
PFF85-441BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits – Sharper throttle response – More accurate gear changes – Reduced wheel-hop – Improved Traction – Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards.
OEM Part Number: 1J019955 / 1J0 199 555
