Powerflex Black -puslasarja – Audi S3 Mk1 Typ 8L 4WD (1999-2003)

Tuotenumero: PFAU240-BK

Alkaen 40,00

Valitse puslasarja *

Toimitusaika 1-3 arkipäivää

Toimitusaika 2-3 viikkoa

Toimitusaika 2-3 viikkoa

Toimituskulut kirjeille 3 €, paketeille 7 €.
Yli 130 € tilaukset toimituskuluitta (pois lukien pikarahdit).

Sarjan hinta sisältää aina yhteen autoon tarvittavan määrän puslia

1. PFF3-501BLK
Front Wishbone (Cast) Front Bush 45mm
Bush size: 45.5mm Diameter
1. PFF3-501GBLK
Front Wishbone (Cast) Front Bush 45mm Camber Adjustable
Bush size: 45.5mm Diameter
1. PFF85-201BLK
Front Wishbone Front Bush 30mm
Bush size: 30mm
1. PFF85-201GBLK
Front Wishbone Front Bush 30mm Camber Adjustable
Bush size: 30mm
2. PFF3-610BLK
Front Wishbone Rear Bush, Cast Arm
2. PFF85-414BLK
Front Wishbone Rear Bush (Track/Race)
3. PFF3-503-19BLK
Front Anti Roll Bar Mounting 19mm
Bush size: 19mm
3. PFF3-503-20BLK
Front Anti Roll Bar Mounting 20mm
Bush size: 20mm
4. PFF85-413BLK
Front Anti Roll Bar Link Bush Kit
5. PFR3-510BLK
Rear Arm Inner Bush
5. PFR3-510GBLK
Rear Arm Inner Bush Camber Adjustable
6. PFR3-511-14BLK
Rear Anti Roll Bar Mounting 14mm
Bush size: 14mm
7. PFF85-416BLK
Steering Rack Mount Bush
8. PFF85-420BLK
Front Engine Mount Dog Bone (Motorsport)
9. PFR3-508BLK
Rear Trailing Arm Front Bush
9. PFR3-508GBLK
Rear Trailing Arm Front Bush Toe Adjust
10. PFF85-505BLK
Lower Engine Mount Small Bush
11. PFF85-430BLK
Front Strut Top Mount Bush
11. PFF85-431BLK
Front Strut Top Mount Bush -10mm
Bush size: -10mm
24. PFF85-424BLK
Front Subframe Rear Bush
25. PFR85-425BLK
Rear Diff Front Mounting Bush
26. PFR85-426BLK
Rear Diff Rear Mounting Bush
27. PFR85-427BLK
Rear Subframe Mounting Bush

Katso alta lisätiedot

Powerflex-puslat A3 / S3 / RS3

Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön

LISÄTIEDOT

1. PFF3-501BLK
For the smaller 30mm bush, please use part no. PFF85-201
1. PFF3-501GBLK
This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201GBLK. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber.
1. PFF85-201BLK
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
1. PFF85-201GBLK
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201GBLK boosts stiffness over the original part by 15%.
2. PFF3-610BLK
Fits the Cast Front Wishbone.
2. PFF85-414BLK
This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use.
4. PFF85-413BLK
Fits plastic link rods only, for aluminium link rods use PFF85-412. Not for link rods with ball joints on the ends.
5. PFR3-510BLK
For an adjustable version of this bush please use PFR3-510G.
5. PFR3-510GBLK
These bushes offer on-car adjustment of the rear camber angles of up to 2 degrees. For a non-adjustable version of this bush please use PFR3-510.
8. PFF85-420BLK
This product is suited to Track / Motorsport use. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505
9. PFR3-508BLK
Also fits VW New Beetle Mk1 and Skoda Octavia MK1 4WD models. To adjust the vehicles rear toe angle, please use PFR3-508G.
9. PFR3-508GBLK
This part has been engineered to provide an additional 0.5 degrees positive toe adjustment, useful to correct excessive toe-in on heavily lowered cars. For a standard replacement part with no offset geometry, please use PFR3-508.
11. PFF85-431BLK
This part has been designed to give an extra 10mm of lowering when fitted as it allows the strut to sit higher into the body of the top mount. These new top mounts ship complete with new top cap spacers, made using our Black material – this additional part means no more modifying of original parts is required. If you wanted to fit our top mounts without the ride height change, you would need to fit part number PFF85-430BLK
25. PFR85-425BLK
This part fits into diff mounting bracket OE number 1J0599271D.
26. PFR85-426BLK
This part fits into subframe OE number 1J0505235F.
27. PFR85-427BLK
This part fits into subframe OE number 1J0505235F.