Powerflex-puslat 3 Series
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
1. PFF5-4601M3BLK
This part is only suitable for fast road or light track use. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if your vehicle is heavily modified and is used for heavy track use, or for competition.
1. PFF5-5601GM3BLK
PFF5-5601GM3 offers additional +0.5 of caster over PFF5-5601M3 and is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting.
1. PFF5-5601M3BLK
This part replaces original bush and also fits M3 vehicles that have a thicker wishbone. PFF5-5601M3 is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting.
2. PFF5-4602-26BLK
Please check Anti roll bar size before ordering
2. PFF5-4602-27BLK
Please check Anti roll bar size before ordering
2. PFF5-4602-30.8BLK
Fits CSL models – Please check Anti roll bar size before ordering
4. PFR5-4609-21.5BLK
Fits M3 Models Only – Please check anti roll bar diameter before ordering
4. PFR5-4609-22.5BLK
Fits M3 CSL and Z4M models – Please check anti roll bar diameter before ordering
10. PFR5-4610M3BLK
PFR5-4610M3BLK Rear Subframe Front Bush is designed specifically for the M3, with fast road performance in mind. For all Non-M3, use PFR5-4610BLK
10. PFR5-4612BLK
Fits E46 M3 and Z4 M vehicles only. Fits into voids in original bush.
11. PFR5-4613BLK
Fits all X3, E46 and Z4 vehicles including M3 and Z4M. Fits into voids in original bush.
15. PFR5-315BLK
It will not fit E24 6 series models built before 05/1982.
16. PFR5-316BLK
This part fits into BMW link rod arm OE numbers: 33551124375 and 33551126932. It will not fit E24 6 series models built before 05/1982.
19. PFR5-4616BLK
This part replaces the bush in the original arm OE number: 33326770813 and 33326770824 respectively. To make adjustments to the vehicles camber angles for precision alignment, please use PFR5-4615G that replaces the original arm and bush.
21. PFR5-4621BLK
Fits E46 & Z4M models only
30. PFR5-5630-10BLK
Suits cars with a standard and aftermarket rear shock absorber with a 10mm pin. Will not fit E36 and E46 Cabriolet models Suspension BrandRear Shock Absorber Shaft DiameterOriginal BMW10mmAST10mmBilstein HD, Sport, PSS Coilovers10mmFK Coilovers10mmH&R Coilovers10mmJRZ RS12mmKoni Sport10mmKW V1, 2, 310mmST Coilovers10mmTein Coilovers12mmThe above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
30. PFR5-5630-12BLK
Suits cars with aftermarket rear shock absorber with a 12mm pin. Will not fit E36 and E46 Cabriolet models. Suspension BrandRear Shock Absorber Shaft DiameterOriginal BMW10mmAST10mmBilstein HD, Sport, PSS Coilovers10mmFK Coilovers10mmH&R Coilovers10mmJRZ RS12mmKoni Sport10mmKW V1, 2, 310mmST Coilovers10mmTein Coilovers12mmThe above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
31. PFF5-4631BLK
This part is 26mm long and can be 1 or 2 per depending on vehicle application.
50. PFF5-4650BLK
Tuneable engine mounts to suit your driving demands. This mount fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit the 4-cyl petrol engine for any models. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The Graph is showing Load against Movement, the peaks are at 5mm. PFF5-4650 is just under 200% stiffer at 5mm compression,the Black Series mount 675% over standard.
