Powerflex-puslat Z Series
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
1. PFF5-301BLK
Concentric Bush, use PFF5-303 for M3 or if you require increased caster angle.
1. PFF5-303BLK
PFF5-303 is an eccentric bush for the M3. This can be fitted to all models through out the range giving them increased castor to match the M3 setup.
2. PFF5-310-23BLK
Check anti roll bar diameter before ordering.
2. PFF5-310-24BLK
Check anti roll bar diameter before ordering
2. PFF5-310-25BLK
For the E28 & E24, it only fits M5 & M365i models – Check anti roll bar diameter before ordering.
2. PFF5-310-26BLK
Check anti roll bar diameter before ordering.
2. PFF5-310-27BLK
Check anti roll bar diameter before ordering
2. PFF5-310-28BLK
Check anti roll bar diameter before ordering
3. PFF5-304BLK
This part is designed to fit models where the Anti Roll Bar joins lower arm not the shock absorber.This part will not fit the E36 M3 and Z3M models as a consequence.
5. PFR5-306GBLK
On car adjustable bush offering camber and toe adjustment. Gives +/-1 degree of adjustment.
6. PFR5-504-14BLK
Please check anti roll bar diameter before ordering – Some part numbers may be described as for the rear but are also for the front anti roll bar on some models. It will not fit E24 6 series models built before 05/1982.
6. PFR5-504-15BLK
Please check anti roll bar diameter before ordering – Some part numbers may be described as for the rear but are also for the front anti roll bar on some models. It will not fit E24 6 series models built before 05/1982.
6. PFR5-504-18BLK
Please check anti roll bar diameter before ordering – Some part numbers may be described as for the rear but are also for the front anti roll bar on some models. It will not fit E24 6 series models built before 05/1982.
30. PFR5-5630-10BLK
Suits cars with a standard and aftermarket rear shock absorber with a 10mm pin. Will not fit E36 and E46 Cabriolet models Suspension BrandRear Shock Absorber Shaft DiameterOriginal BMW10mmAST10mmBilstein HD, Sport, PSS Coilovers10mmFK Coilovers10mmH&R Coilovers10mmJRZ RS12mmKoni Sport10mmKW V1, 2, 310mmST Coilovers10mmTein Coilovers12mmThe above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
30. PFR5-5630-12BLK
Suits cars with aftermarket rear shock absorber with a 12mm pin. Will not fit E36 and E46 Cabriolet models. Suspension BrandRear Shock Absorber Shaft DiameterOriginal BMW10mmAST10mmBilstein HD, Sport, PSS Coilovers10mmFK Coilovers10mmH&R Coilovers10mmJRZ RS12mmKoni Sport10mmKW V1, 2, 310mmST Coilovers10mmTein Coilovers12mmThe above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
50. PFF5-4650BLK
Tuneable engine mounts to suit your driving demands. This mount fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit the 4-cyl petrol engine for any models. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The Graph is showing Load against Movement, the peaks are at 5mm. PFF5-4650 is just under 200% stiffer at 5mm compression,the Black Series mount 675% over standard.
