Powerflex-puslat Leon Models
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
1. PFF3-501BLK
For the smaller 30mm bush, please use part no. PFF85-201
1. PFF3-501GBLK
This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For the smaller 30mm bush, please use part no. PFF85-201GBLK. CNC machined stainless steel sleeve with knurled end pattern to prevent unwanted rotation.Rotate to adjust camber.
2. PFF3-610BLK
Fits the Cast Front Wishbone.
2. PFF85-410BLK
Fits genuine OE pressed steel arms with 23mm hole depth. For aftermarket pressed steel arms with 21mm hole depth, use PFF85-410PABLK and for cast arms use PFF3-610BLK.
2. PFF85-410PABLK
This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK
2. PFF85-414BLK
This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use.
3. PFF85-411-18BLK
Please check anti roll bar diameter before ordering.
3. PFF85-411-21BLK
Please check anti roll bar diameter before ordering.
3. PFF85-411-23BLK
Please check anti roll bar diameter before ordering.
4. PFF85-412BLK
Fits aluminium link rods only, for plastic link rods use PFF85-413. Not for link rods with ball joints on the ends.
5. PFR3-510BLK
For an adjustable version of this bush please use PFR3-510G.
5. PFR3-510GBLK
These bushes offer on-car adjustment of the rear camber angles of up to 2 degrees. For a non-adjustable version of this bush please use PFR3-510.
8. PFF85-420BLK
This product is suited to Track / Motorsport use. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505
9. PFR3-508BLK
Also fits VW New Beetle Mk1 and Skoda Octavia MK1 4WD models. To adjust the vehicles rear toe angle, please use PFR3-508G.
9. PFR3-508GBLK
This part has been engineered to provide an additional 0.5 degrees positive toe adjustment, useful to correct excessive toe-in on heavily lowered cars. For a standard replacement part with no offset geometry, please use PFR3-508.
11. PFF85-431BLK
This part has been designed to give an extra 10mm of lowering when fitted as it allows the strut to sit higher into the body of the top mount. These new top mounts ship complete with new top cap spacers, made using our Black material – this additional part means no more modifying of original parts is required. If you wanted to fit our top mounts without the ride height change, you would need to fit part number PFF85-430BLK
25. PFR85-425BLK
This part fits into diff mounting bracket OE number 1J0599271D.
26. PFR85-426BLK
This part fits into subframe OE number 1J0505235F.
27. PFR85-427BLK
This part fits into subframe OE number 1J0505235F.
