1. PFF85-201BLK – Front Wishbone Front Bush 30mm
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK.
OEM Part Number: 357407182
OEM Part Number: 191407182
1. PFF85-201GBLK – Front Wishbone Front Bush 30mm Camber Adjustable
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3, and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check the original bush size. Later cars may use a larger (non-adjustable) 45mm bush PFF3-501.
OEM Part Number: 357407182
OEM Part Number: 191407182
2. PFF85-1202BLK – Front Arm Rear Bush
For the Skodia Fabia 5J, this bush only fits models with these chassis numbers: F5J 8A502 657 Onward, F5J 8B503 032 Onward, F5J 8K450 961 Onward, F5J 83172 974 Onward.
OEM Part Number: 1J0 407 181 / 1J0 407 181 B = Bush
OEM Part Number: 6R0 407 151 / 6R0 407 152 = Arm
3. PFF85-603-18BLK – Front Anti Roll Bar Bush 18mm
Please check anti-roll bar diameter before ordering.
OEM Part Number: Bar = 8Z0411305M
OEM Part Number: Bush = 6Q0411314P
10. PFR85-1910BLK – Rear Beam Mounting Bush
OEM Part Number: 1S0501541F
11. PFF85-430BLK – Front Strut Top Mount Bush
OEM Part Number: 1J0412331C
11. PFF85-431BLK – Front Strut Top Mount Bush -10mm
This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430BLK.
OEM Part Number: 1J0412331C
20. PFF85-1920BLK – Lower Torque Mount Large Bush Insert (Motorsport)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement.
PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering
OEM Part Number: 1S0199851
OEM Part Number: 12E199851B
