1. PFF3-1001 – Front Wishbone Front Bush
Fits both cast steel/aluminum and pressed steel arms.
OEM Part Number: Arm = 8Z0407151R / 8Z0407152R / 8Z0407151S / 8Z0407152S
OEM Part Number: Arm = 8Z0407151J / 8Z0 407152J / 8Z0407151L / 8Z0407152L / 8Z0407153L
OEM Part Number: Arm = 8Z0 407 153 L / Bush = 8Z0407182B / 8Z0407182C
2. PFF85-602G – Front Wishbone Rear Bush Caster Offset
PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models.
OEM Part Number: 1K0407183E
OEM Part Number: 8Z0407183
2. PFF85-602 – Front Wishbone Rear Bush
For the Audi A2, PFF85-602 fits aluminium and pressed steel arms only as fitted to the 1.2 models and later 1.4/1.6 models. It will not fit the cast steel arms as fitted to early 1.4/1.6 models.
OEM Part Number: 1K0407183E
OEM Part Number: 8Z0407183 / 8Z0 407 153 L
3. PFF85-603-18 – Front Anti Roll Bar Bush 18mm
Please check anti-roll bar diameter before ordering.
OEM Part Number: Bar = 8Z0411305M
OEM Part Number: Bush = 6Q0411314P
20. PFF85-620P – Lower Engine Mount Large Bush (Tuned/Track)
PFF85-620P uses our Purple 80A durometer material and is suitable for significantly tuned cars or those used on track. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 6Q0199851AA / 6Q0199851AC
OEM Part Number: 6Q0199851AP / 6Q0199851AT
OEM Part Number: 8Z0199851H
20. PFF85-620 – Lower Engine Mount Large Bush (Std Petrol)
PFF85-620 is made using our Yellow 70A durometer material and is suitable for standard petrol models or mildly tuned diesel models. For track/tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 6Q0199851AA / 6Q0199851AC
OEM Part Number: 6Q0199851AP / 6Q0199851AT
OEM Part Number: 8Z0199851H
20. PFF85-620R – Lower Engine Mount Large Bush (Std Diesel)
PFF85-620R is made using our Red 65A durometer material and is suitable for standard diesel vehicles only. For tuned diesel vehicles or petrol models use PFF85-620. For track/heavily tuned models use PFF85-620P. Fitting this engine mount bush to 1.4 TDI 3 cylinders is not advisable. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 6Q0199851AA / 6Q0199851AC
OEM Part Number: 6Q0199851AP / 6Q0199851AT
OEM Part Number: 8Z0199851H
33. PFF85-633 – Steering Rack Mounting Bush
The OE rubber steering rack mounting bush that secures the rack position is one of those that commonly softens causing vague steering often followed by a pulling feeling on the road, and a less than enjoyable driving experience. PFF85-633 Steering Rack Mounting Bush is a cheap fit-and-forget solution, improving steering response and bringing back a factory-fresh feel. Fits Polo MK3 up to 2013, fits Ibiza MK4 up to 2015 and will not fit solidly mounted racks.
OEM Part Number: 6Q0419884 / 6Q0 419 884
OEM Part Number: 6Q0423844B / 6Q0 423 844 B
OEM Part Number: 6Q0423884B / 6Q0 423 884 B
EXH023 – Exhaust Mount
OEM Part Number: 712770470 / 1756516020
OEM Part Number: 1H0253147B / 1H0253147C / 20650D0101
OEM Part Number: 255047 / 17565-28010
