Powerflex Road -puslasarja – Audi A4 (2008-2016)

Tuotenumero: PFAU636-RD

Alkaen 33,00

Valitse puslasarja *

Toimitusaika 1-3 arkipäivää

Toimitusaika 2-3 viikkoa

Toimitusaika 2-3 viikkoa

Toimituskulut kirjeille 3 €, paketeille 7 €.
Yli 130 € tilaukset toimituskuluitta (pois lukien pikarahdit).

Sarjan hinta sisältää aina yhteen autoon tarvittavan määrän puslia

1. PFF3-701
Front Lower Control Arm Inner Bush
2. PFF3-702
Front Lower Radius Arm to Chassis Bush
Bush size: 75mm
2. PFF3-702G
Front Lower Radius Arm to Chassis Bush Caster Adjustable
Bush size: 75mm
2. PFF3-802
Front Lower Radius Arm to Chassis Bush
Bush size: 65mm
2. PFF3-802G
Front Lower Radius Arm to Chassis Bush Caster Adjustable
Bush size: 65mm
3. PFF3-203
Front Upper Control Arm Bush
4. PFF3-204-25
Front Anti Roll Bar Bush 25mm
Bush size: 25mm
4. PFF3-204-25.6
Front Anti Roll Bar Bush 25.6mm
Bush size: 25.6mm
4. PFF3-204-26
Front Anti Roll Bar Bush 26mm
Bush size: 26mm
4. PFF3-204-26.5
Front Anti Roll Bar Bush 26.5mm
4. PFF3-204-27
Front Anti Roll Bar Bush 27mm
Bush size: 27mm
4. PFF3-204-29
Front Anti Roll Bar Bush 29mm
Bush size: 29mm
7. PFF3-213
Front Anti Roll Bar Link Bush
7. PFF3-913-10
Front Anti Roll Bar Link Bush 10mm
Bush size: 10mm
11. PFR3-711
Rear Lower Arm Front Bush
12. PFR3-712
Rear Lower Arm Rear Bush
14. PFR3-714
Rear Wheel Bearing Housing Bush
15. PFR85-515-19.6
Rear Anti Roll Bar Bush 19.6mm
Bush size: 19.6mm
15. PFR85-515-21.7
Rear Anti Roll Bar Bush 21.7mm
Bush size: 21.7mm
16. PFR3-716
Rear Track Control Arm Outer Bush
16. PFR3-716
Rear Track Control Arm Inner Bush
17. PFR3-715
Rear Tie Rod Outer Bush
17. PFR3-715
Rear Tie Rod Inner Bush
18. PFR3-718
Rear Anti Roll Bar Link Bush
25. PFF3-725
Transmission Mount Insert
30. PFR3-730
Rear Subframe Front Bush
30. PFR3-731
Rear Subframe Front Bush Insert
32. PFR3-732
Rear Subframe Rear Bush
32. PFR3-733
Rear Subframe Rear Bush Insert
PF3-1660
Jack Pad Adaptor
Bush size: 80mm Diameter

Katso alta lisätiedot

Powerflex-puslat A4 / S4 / RS4

Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön

LISÄTIEDOT

1. PFF3-701
PFF3-701 is a reinforced replacement bush that is 18% stiffer than the original bush to revitalise bush performance and restore steering precision.
2. PFF3-702
This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-702G.
2. PFF3-702G
This part suits arms with a 75mm diameter bush, for 65mm bushes please use PFF3-802G. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702G provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702.
2. PFF3-802
This part suits arms with a 65mm diameter bush, for 75mm bushes please use PFF3-702. This is a replacement part that in our road series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-802G.
2. PFF3-802G
This part suits arms with a 65mm diameter bush, for 75mm bushes please use PFF3-702. This is a replacement part that in our road series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-802G provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-802.
4. PFF3-204-25
Please check anti roll bar diameter before ordering.
4. PFF3-204-25.6
Please check anti roll bar diameter before ordering.
4. PFF3-204-26
Please check anti-roll bar diameter before ordering.
4. PFF3-204-26.5
Please check anti-roll bar diameter before ordering.
4. PFF3-204-27
Please check anti roll bar diameter before ordering.
4. PFF3-204-29
Please check anti roll bar diameter before ordering.
7. PFF3-213
Fits bracket with bolts at each end, does not fit bracket with ball joint at each end.
7. PFF3-913-10
PFF3-913-10 fits vehicles with 170mm long anti roll bar links with a 10mm bolt. For 12mm bolts please use PFF3-913-12.
12. PFR3-712
PFR3-712 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.
15. PFR85-515-19.6
Please check anti roll bar diameter before ordering
15. PFR85-515-21.7
Please check anti roll bar diameter before ordering
16. PFR3-716
PFR3-716 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.
16. PFR3-716
PFR3-716 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.
17. PFR3-715
PFR3-715 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.
17. PFR3-715
PFR3-715 is a reinforced replacement bush to revitalise bush performance and provide stability to the rear suspension.
25. PFF3-725
This polyurethane insert fits into and fills voids in original bracket. This new part is designed to limit excessive movement of the transmission under load by providing additional stability to the mount from both sides. This insert is very easy to fit and is fast way to improve shift feel and performance.
30. PFR3-730
This is a replacement bush, for an insert that fits into the original bush OE number: 8K0505145B please use PFR3-731, for an insert to fit the original bush OE number: 4G0505145B please use PFR3-737.
30. PFR3-731
This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-730BLK. A5 notes:- Fits A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-735 for all other A5 models).
32. PFR3-732
This is a replacement bush, for an insert that fits into the original bush OE number: 8K0505145C please use PFR3-733, for an insert to fit the original bush OE number: 4G0505145C please use PFR3-735.
32. PFR3-733
This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-732. A5 notes:- Fits A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-737 for all other A5 models).
. PF3-1660
PF3-1660 is a polyurethane jack pad to fit into the plastic lifting points found on a large number of performance Audi vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Audi A4 (2008-2016),Audi A4 Quattro (2008 – 2016),Audi RS4 (2012-2016),Audi S4 (2009-2016),Audi A5 (2007-2016),Audi A5 Quattro (2007-2016),Audi RS5 (2010 – 2016),Audi S5 (2007 – 2016),Audi A6 (2011 – ),Audi A6 Quattro (2011 – ),Audi RS6 (2012 – ),Audi S6 (2012 – ),Audi A7 (2010 – 2017),Audi A7 Quattro (2010 – 2017),Audi RS7 (2013 – 2017),Audi S7 (2012 – 2017) ,Audi R8 (2006 – ON),Audi Q5 (2008-2017),Audi Q5 Quattro (2008-2017),Audi SQ5 (2013 – 2017),Audi TT MK2 8J (2007-2014)