Powerflex-puslat 3 Series
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
1. PFF5-301
Concentric Bush, use PFF5-303 for M3 or if you require increased caster angle.
1. PFF5-303
Eccentric Bush For M3 Or If You Require Increased Caster Angle.
2. PFF5-310-23
Check anti roll bar diameter before ordering.
2. PFF5-310-24
Check anti roll bar diameter before ordering
2. PFF5-310-25
For the E28 & E24, it only fits M5 & M365i models – Check anti roll bar diameter before ordering.
2. PFF5-310-26
Check anti roll bar diameter before ordering.
2. PFF5-310-27
Check anti roll bar diameter before ordering
2. PFF5-310-28
Check anti roll bar diameter before ordering
3. PFF5-304
This part is designed to fit models where the Anti Roll Bar joins lower arm, not the shock absorber. This part will not fit the E36 M3 and Z3M models as a consequence.
5. PFR5-306G
On car adjustable bush offering camber and toe adjustment. Gives +/-1 degree of adjustment.
6. PFR5-308-14
Suitable for both 14mm and 14.5mm bars
30. PFR5-5630-10
Suits cars with a standard and aftermarket rear shock absorber with a 10mm pin. Will not fit E36 and E46 Cabriolet models Suspension Brand Rear Shock Absorber Shaft Diameter Original BMW 10mm AST 10mm Bilstein HD, Sport, PSS Coilovers 10mm FK Coilovers 10mm H&R Coilovers 10mm JRZ RS 12mm Koni Sport 10mm KW V1, 2, 3 10mm ST Coilovers 10mm Tein Coilovers 12mm The above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
30. PFR5-5630-12
Suits cars with aftermarket rear shock absorber with a 12mm pin. Will not fit E36 and E46 Cabriolet models. Suspension BrandRear Shock Absorber Shaft DiameterOriginal BMW10mmAST10mmBilstein HD, Sport, PSS Coilovers10mmFK Coilovers10mmH&R Coilovers10mmJRZ RS12mmKoni Sport10mmKW V1, 2, 310mmST Coilovers10mmTein Coilovers12mmThe above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
31. PFF5-4631
This part is 26mm long and can be 1 or 2 per depending on vehicle application.
50. PFF5-4650
Tuneable engine mounts to suit your driving demands. This mount fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit the 4-cyl petrol engine for any models. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The Graph is showing Load against Movement, the peaks are at 5mm. PFF5-4650 is just under 200% stiffer at 5mm compression,with the 4 adjuster pins installed just under 300% over standard.
