Powerflex-puslat 3 Series
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
1. PFF5-4601M3
This part is not suitable for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if this is the intended use for your vehicle.
1. PFF5-5601GM3
PFF5-5601GM3 offers additional +0.5 of caster over PFF5-5601M3 and is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part
1. PFF5-5601M3
This part fits into original bracket and fits M3 vehicles that have a thicker wishbone. PFF5-5601M3 is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting.
2. PFF5-4602-26
Please check Anti roll bar size before ordering
2. PFF5-4602-27
Please check Anti roll bar size before ordering
2. PFF5-4602-30.8
Fits CSL models Please check Anti roll bar size before ordering
4. PFR5-4609-21.5
Fits M3 Models Only – Please check anti roll bar diameter before ordering
4. PFR5-4609-22.5
Fits M3 CSL and Z4M models – Please check anti roll bar diameter before ordering
10. PFR5-4610M3
PFR5-4610M3 Rear Subframe Front Bush is designed specifically for the M3, with fast road performance in mind. For all Non-M3, use PFR5-4610 The new lower half of the bush is made using our Purple Shore A 80 material to provide extra support for the rear axle, whilst the upper half remains in our Yellow Shore A 70 material for optimum NVH absorption.
10. PFR5-4612
Fits E46 M3 and Z4 M vehicles only. Fits into voids in original bush.
11. PFR5-4613
Fits all X3, E46 and Z4 vehicles including M3 and Z4M. Fits into voids in original bush.
15. PFR5-315
It will not fit E24 6 series models built before 05/1982.
16. PFR5-316
It will not fit E24 6 series models built before 05/1982.
19. PFR5-4615G
PFR5-4615G Adjustable Rear Control Arm provides on car rear camber adjustment, allowing a +1.0 to -3.0 change for precision alignment – Useful to correct excessive camber on heavily lowered cars. This arm includes high performance polyurethane bushes that are suitable for road and track use without the comfort and longevity issues associated with spherical joints. PFR5-4615G replaces the original arm and bush OE numbers: 33326770813 and 33326770824 respectively. For a replacement bush only to fit in the original arm, please use PFR5-4616.
19. PFR5-4616
This part replaces the bush in the original arm OE number: 33326770813 and 33326770824 respectively. To make adjustments to the vehicles camber angles for precision alignment, please use PFR5-4615G that replaces the original arm and bush.
21. PFR5-4621
Fits E46 M3 and Z4M models only
30. PFR5-5630-10
Suits cars with a standard and aftermarket rear shock absorber with a 10mm pin. Will not fit E36 and E46 Cabriolet models Suspension Brand Rear Shock Absorber Shaft Diameter Original BMW 10mm AST 10mm Bilstein HD, Sport, PSS Coilovers 10mm FK Coilovers 10mm H&R Coilovers 10mm JRZ RS 12mm Koni Sport 10mm KW V1, 2, 3 10mm ST Coilovers 10mm Tein Coilovers 12mm The above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
30. PFR5-5630-12
Suits cars with aftermarket rear shock absorber with a 12mm pin. Will not fit E36 and E46 Cabriolet models. Suspension BrandRear Shock Absorber Shaft DiameterOriginal BMW10mmAST10mmBilstein HD, Sport, PSS Coilovers10mmFK Coilovers10mmH&R Coilovers10mmJRZ RS12mmKoni Sport10mmKW V1, 2, 310mmST Coilovers10mmTein Coilovers12mmThe above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
31. PFF5-4631
This part is 26mm long and can be 1 or 2 per depending on vehicle application.
50. PFF5-4650
Tuneable engine mounts to suit your driving demands. This mount fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit the 4-cyl petrol engine for any models. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The Graph is showing Load against Movement, the peaks are at 5mm. PFF5-4650 is just under 200% stiffer at 5mm compression,with the 4 adjuster pins installed just under 300% over standard.
. PF5-4660
PF5-4660 is a polyurethane jack pad to fit into the plastic lifting points found on most modern BMW and related vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle.
