Powerflex-puslat Fiesta Models
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
2. PFF19-1502G
PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree.
3. PFF19-1503-19
Please check anti roll bar diameter before ordering.
3. PFF19-2203-21
Please check anti roll bar diameter before ordering.
5. PFF19-2002
This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004 Fits oval bracket only (left).
6. PFF19-2001
This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003.
6. PFF19-2020
Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It’s also super easy to replace – just two bolts and it’s out with the old, in with the new and no pressing out of any rubber! PFF19-2020 Lower Engine Mount Bracket & Bushes (Yellow 70A) is 50% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement.
6. PFF19-2020P
Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It’s also super easy to replace – just two bolts and it’s out with the old, in with the new and no pressing out of any rubber! PFF19-2020P Lower Engine Mount Bracket & Bushes (Purple 80A) is 100% stiffer than OE and recommended for higher powered cars used on the road/track. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement.
25. PFF19-2025
This is an insert to fit into the original mount to limit movement of the engine to provide stability under acceleration. This should be considered as a performance upgrade and therefore an increase in noise and vibration is to be expected.
26. PFF19-2026
Fits 6-speed manual gearbox models only. This part is designed to limit excessive movement of the upper transmission under load by providing additional stability to the mount from filling excessive voiding in the original mount. This insert is very easy to fit and is a fast way to improve shift feel and performance. This should be considered as a performance upgrade and therefore an increase in noise and vibration is to be expected.
30. PFR19-2030
PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable Purple 80 Shore A material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles.
. PF19-860
PF19-860 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Ford C-Max MK1 (2003-2010),Ford C-Max MK2 (2011 ON),Ford Fiesta Mk7 (2008 – 2017),Ford Fiesta Mk7 ST (2013 – 2017),Ford Fiesta Mk6 inc ST (2002-2008),Ford Focus Mk1, Ford Focus Mk1 RS,Ford Focus Mk1 ST, Ford Focus MK2,Ford Focus MK2 RS, Ford Focus MK2 ST,Ford Focus Mk3, Ford Focus MK3 RS,Ford Focus Mk3 ST,Mazda Mazda 3 BK (2004-2009),Mazda Mazda 3 BL (2009-2013)
