Powerflex-puslat Mazda 2 (2003 – 2007)
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
2. PFF19-1502G
PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree.
3. PFF19-1503-22
Please check anti roll bar diameter before ordering.
5. PFF19-1520
If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade.
5. PFF19-2002
This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004 Fits oval bracket only (left).
6. PFF19-1521
This part fits brackets with a round bore, for brackets with an oval bore please use PFF19-2001. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade.
6. PFF19-2001
This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003.
6. PFF19-2020
Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It’s also super easy to replace – just two bolts and it’s out with the old, in with the new and no pressing out of any rubber! PFF19-2020 Lower Engine Mount Bracket & Bushes (Yellow 70A) is 50% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement.
6. PFF19-2020P
Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It’s also super easy to replace – just two bolts and it’s out with the old, in with the new and no pressing out of any rubber! PFF19-2020P Lower Engine Mount Bracket & Bushes (Purple 80A) is 100% stiffer than OE and recommended for higher powered cars used on the road/track. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement.
25. PFF19-2025
This is an insert to fit into the original mount to limit movement of the engine to provide stability under acceleration. This should be considered as a performance upgrade and therefore an increase in noise and vibration is to be expected.
26. PFF19-2026
Fits 6-speed manual gearbox models only. This part is designed to limit excessive movement of the upper transmission under load by providing additional stability to the mount from filling excessive voiding in the original mount. This insert is very easy to fit and is a fast way to improve shift feel and performance. This should be considered as a performance upgrade and therefore an increase in noise and vibration is to be expected.
30. PFR19-2030
PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable Purple 80 Shore A material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles.
