Powerflex-puslat 997 (2005-2012)
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
1. PFF57-501-23.5
Please check anti-roll bar diameter before ordering.
2. PFF57-802
PFF57-802 allows the caster angle to be adjusted on-car.
3. PFF57-801
PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75. For non-adjustable use PFF57-503.
5. PFF57-502
Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. – Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
6. PFF57-503
No adjustment, concentric. Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. – Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.
8. PFR57-1508
PFR57-1508 fits 19.5mm width arms, for 22mm width arms please use PFR57-508.
8. PFR57-508
On some early 997 models (pre-2006) there is no support on the outside face of the link arm to hub bush. For these models use 4 x PFR57-508 for the link arm to hub bushes & 4 x PFR57-509 for the link arm to subframe bush. For hub carriers with support either side of the bush, use 8 x PFR57-509. PFR57-508 fits 22mm width arms, for 19.5mm width arms please use PFR57-1508.
8. PFR57-509
On some early 997 models (pre-2006) there is no support on the outside face of the link arm to hub bush. For these models use 4 x PFR57-508 for the link arm to hub bushes & 4 x PFR57-509 for the link arm to subframe bush. For hub carriers with support either side of the bush, use 8 x PFR57-509.
9. PFR57-1509
PFR57-1509 fits 19.5mm width arms, for 22mm width arms please use PFR57-509.
30. PFR57-531
Fits 996 & 997 vehicles with the twin bush mounting bracket at the end of the gearbox, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush in the end casing use PFR57-530. This part fits the following vehicles:Porsche 996 (1999-2005)Porsche 996 Carrera 4 (2002-04)Porsche 996 Carrera and Carrera 4S (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Note: Automatic TransmissionPorsche 996 GT2 and GT3 Coupe (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Manual TransmissionPorsche 997 (2005-2013)Porsche 997 Carrera 4 and Carrera 4S (2006-08)Porsche 997 Carrera and Carrera S (2005-08)Porsche 997 Targa 4 and Targa 4S (2007-08)Porsche 997 Turbo (2007-09) Note: Automatic TransmissionPorsche 997 GT3 RS 4.0 Coupe (2011)Porsche 997 GT3 and GT3 RS Coupe (2007-11)Porsche 997 Turbo (2007-13) Manual Transmission
30. PFR57-532
Fits manual gearbox with a single bush in the end casing except for Turbo GT2 & GT3 models which use PFR57-531. Does not fit Generation 2 997 models. This part fits the following vehicles:Porsche 911 Carrera 4 Convertible 3.6L H6 Chassis 997 (2006-2008)Porsche 911 Carrera 4 Coupe 3.6L H6 Chassis 997 (2006-2008)Porsche 911 Carrera Convertible 3.6L H6 Chassis 996 (2005)Porsche 911 Carrera Convertible 3.6L H6 Chassis 997 (2005-2008)Porsche 911 Carrera Coupe 3.6L H6 Chassis 996 (2005)Porsche 911 Carrera Coupe 3.6L H6 Chassis 997 (2005-2008)
