Powerflex Road -puslasarjat – Skoda Citigo (2011 -)

Tuotenumero: PFSK6507-RD

Alkaen 19,00

Valitse puslasarja *

Toimitusaika 2-3 arkipäivää

Toimitusaika 1-2 viikkoa

Toimitusaika 1-2 viikkoa

Toimituskulut kirjeille 3,5 €, paketeille 7 €.
Yli 130 € tilaukset toimituskuluitta

Sarjan hinta sisältää aina yhteen autoon tarvittavan määrän puslia (poislukien pakoputkiston kannakkeet, jotka myydään kappaleittain). Huomaa kuitenkin, että jokin puslasarja voi sopia useampaan paikkaa autossa. Jotkin road-sarjan puslat voivat tulla kovempana black-materiaalisena. Katso alasvetovalikon tuotteen kuva.

1. PFF85-201 – Front Wishbone Front Bush 30mm
2. PFF85-1202 – Front Arm Rear Bush
3. PFF85-603-18 – Front Anti Roll Bar Bush 18mm
10. PFR85-1910 – Rear Beam Mounting Bush
11. PFF85-431W – Front Strut Top Mount Bush Washer
11. PFF85-431 – Front Strut Top Mount Bush -10mm
11. PFF85-430 – Front Strut Top Mount Bush
20. PFF85-1922P – Lower Torque Mount Large Bush Insert (Tuned/Track)
20. PFF85-1920P – Lower Torque Mount Large Bush Insert (Tuned/Track)
20. PFF85-1922 – Lower Torque Mount Large Bush Insert (Standard)
20. PFF85-1920 – Lower Torque Mount Large Bush Insert (Standard)
20. PFF85-1923P – Lower Torque Mount Large Bush (Tuned/Track)
20. PFF85-1923 – Lower Torque Mount Large Bush (Fast Road)
EXH023 – Exhaust Mount

1. PFF85-201 – Front Wishbone Front Bush 30mm
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
OEM Part Number: 357407182
OEM Part Number: 191407182

2. PFF85-1202 – Front Arm Rear Bush
For the Skodia Fabia 5J, this bush only fits models with these chassis numbers: F5J 8A502 657 Onward, F5J 8B503 032 Onward, F5J 8K450 961 Onward, F5J 83172 974 Onward.
OEM Part Number: 1J0 407 181 / 1J0 407 181 B = Bush
OEM Part Number: 6R0 407 151 / 6R0 407 152 = Arm

3. PFF85-603-18 – Front Anti Roll Bar Bush 18mm
Please check anti-roll bar diameter before ordering.
OEM Part Number: Bar = 8Z0411305M
OEM Part Number: Bush = 6Q0411314P

10. PFR85-1910 – Rear Beam Mounting Bush
OEM Part Number: 1S0501541F

11. PFF85-431W – Front Strut Top Mount Bush Washer
PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns.
Fitting couldn’t be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it!
NB: fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431.
OEM Part Number: 1J0412331C

11. PFF85-431 – Front Strut Top Mount Bush -10mm
This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430.
OEM Part Number: 1J0412331C

11. PFF85-430 – Front Strut Top Mount Bush
OEM Part Number: 1J0412331C

20. PFF85-1922P – Lower Torque Mount Large Bush Insert (Tuned/Track)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement.

PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923.
OEM Part Number: 1S0199851E

20. PFF85-1920P – Lower Torque Mount Large Bush Insert (Tuned/Track)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement.

PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering
OEM Part Number: 1S0199851
OEM Part Number: 12E199851B

20. PFF85-1922 – Lower Torque Mount Large Bush Insert (Standard)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement.

PFF85-1922 only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For a complete replacement bush use PFF85-1923.
OEM Part Number: 1S0199851E

20. PFF85-1920 – Lower Torque Mount Large Bush Insert (Standard)
Fitting this new insert reduces engine movement caused by the torque reaction of the engine during acceleration and deceleration. Gains can be seen in power transfer to the road along with less stress on the exhaust downpipe, hoses, and wiring. A small increase in NVH usually at idle should be expected when fitting an engine/transmission mount insert because you are effectively removing the original voiding and stiffening the mount between the engine/transmission and chassis. The performance benefits felt by fitting an uprated mount or insert come from blocking this voiding up, thus restricting engine movement.

PFF85-1920 only fits 1.0 MPI and electric models with the pre-facelift mount (see below), check which mount is fitted before ordering
OEM Part Number: 1S0199851
OEM Part Number: 12E199851B

20. PFF85-1923P – Lower Torque Mount Large Bush (Tuned/Track)
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
OEM Part Number: 1S0199851E

20. PFF85-1923 – Lower Torque Mount Large Bush (Fast Road)
PFF85-1923 is a complete replacement bush, only fits 2015-on 1.0 MPI and 1.0 TSI and GTI models with the post-facelift mount (see below), check which mount is fitted before ordering. For an insert only use PFF85-1922.
OEM Part Number: 1S0199851E

EXH023 – Exhaust Mount
OEM Part Number: 712770470 / 1756516020
OEM Part Number: 1H0253147B / 1H0253147C / 20650D0101
OEM Part Number: 255047 / 17565-28010



    Powerflex
    EPTG Ltd.
    Unit 7 Union Buildings
    Wallingford Road
    Uxbridge
    UB8 2FR
    ENGLAND
    Email: [email protected]