Powerflex-puslat Jetta Models
Powerflex-puslat ovat markkinoiden suosituin uretaanipuslamerkki. Powerflexin polyuretaanipuslat antavat alustalle jämäkkyyttä, joka tuntuu ajotuntumassa ja renkaiden vähäisemmässä kulumisessakin, kun pyöränkulmat eivät pääse muuttumaan kovassa rasituksessa väljien puslien takia. Tavalliseen katuajoon suosittelemme road-sarjan puslia. Black-sarjan puslat ovat jo melko jäykkiä, joten ne sopivat kilpakäyttöön radalle tai muuhun vastaavaan vaativaan käyttöön
LISÄTIEDOT
1. PFF85-201
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
1. PFF85-201G
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%.
3. PFF85-205-22
Fits cars with the Eibach 22mm front anti roll bar.
4. PFF85-208
PFF85-208 is suitable for links with a 12mm diameter shaft with a 19mm nut. For 10mm shafts use PFF85-208-10. Not Suitable For VR6 – Models and GT Models with chassis codes AAA, AGG & AKR (VW Vento).
4. PFF85-208-10
Bushes fit eye bolt mounting either side of where it passes through the wishbone. PFF85-208-10 is suitable for links with a 10mm diameter shaft which uses an M8 nut to hold the bushes in position. A lot of the pattern replacement links are now coming with the 10mm shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models.
9. PFF85-232
This bush is suitable for vehicles with 18.5mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233 For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234
9. PFF85-233
This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For 44mm diameter steering racks and an 18.5mm wide bracket use PFF85-232. For 49.5mm diameter ZF steering racks and a 15mm wide bracket use PFF85-234.
9. PFF85-234
This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 49.5mm to suit LHD ZF power steering racks. For 44mm diameter steering racks and a 18.5mm wide bracket use PFF85-232 For 44mm diameter steering racks and a 15mm wide bracket use PFF85-233
12. PFR85-212
Fits cars with the Eibach 25mm rear anti roll bar.
20. PFF85-244
They do not fit Hydro mounts as fitted to the 16v GTi models with engine codes KR, PL, 9A & G60 with engine code PG
20. PFF85-244R
They do not fit Hydro mounts as fitted to the 16v GTi models with engine codes KR, PL, 9A & G60 with engine code PG
20. PFF85-245
These inserts fits into the original bush, OE part number 191199262. They do not fit Hydro mounts as fitted to the 16v GTi models with engine codes KR, PL, 9A & G60 with engine code PG
20. PFF85-245R
These inserts fits into the original bush, OE part number 191199262. They do not fit Hydro mounts as fitted to the 16v GTi models with engine codes KR, PL, 9A & G60 with engine code PG
25. PFR85-225-25
Fits cars with the Eibach 25mm rear anti roll bar.
. BS006
BS006 fit the front of the following vehicles. The OE dust cover fits this bump stop. Volkswagen Corrado (1989 – 1995) Volkswagen Golf Mk 3 (1992-1998) Volkswagen Golf Mk2 (1985-1992) Volkswagen Golf Mk2 4WD inc G60, Rallye, Country Volkswagen Jetta (1985 – 1992) Volkswagen Vento (1992 – 1998)
. BS008
BS008 fits the rear of the following vehicles Volkswagen Corrado (1989 – 1995) Volkswagen Golf Mk 3 (1992-1998) Volkswagen Golf Mk2 (1985-1992) Volkswagen Jetta (1985 – 1992) Volkswagen Vento (1992 – 1998)