1. PFF19-2201GBLK – Front Arm Front Bush Camber Adjustable
PFF19-2201G Front Arm Front Bush Camber Adjust is made using our Black 95A material and features a machined stainless steel sleeve and spanner, allowing for up to +/- 0.5° of camber adjustment to fine-tune the setup for road or track use.
OEM Part Number: 2201370 / H1BC-3042-AE
OEM Part Number: 2337412 / H1BC-3051-AF
1. PFF19-2201BLK – Front Arm Front Bush
PFF19-2201 Front Arm Front Bush is made using our stiffest Black 95A material, reducing lateral movement of the wishbone.
OEM Part Number: 2201370 / H1BC-3042-AE
OEM Part Number: 2337412 / H1BC-3051-AF
2. PFF19-2202GBLK – Front Wishbone Rear Bush Caster Adjustable
PFF19-2202GBLK Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0° of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased by 250% over standard rubber.
OEM Part Number: 1796132 / C1BC-3042-AA / 1737305 / 8V51-3051-BH
OEM Part Number: 1796133 / C1BC-3051-AA / 1737309 / 8V51-3042-BH
OEM Part Number: 2201370 / H1BC-3042-AE / 2337412 / H1BC-3051-AF
2. PFF19-2202BLK – Front Wishbone Rear Bush
OEM Part Number: 1796132 / C1BC-3042-AA / 1737305 / 8V51-3051-BH
OEM Part Number: 1796133 / C1BC-3051-AA / 1737309 / 8V51-3042-BH
OEM Part Number: 2201370 / H1BC-3042-AE / 2337412 / H1BC-3051-AF
3. PFF19-2203-21BLK – Front Anti Roll Bar Bush 21mm
Please check the anti-roll bar diameter before ordering.
OEM Part Number: Bush = 2272692 / K1BC5484AB
OEM Part Number: Bar = 2272689 / K1BC5482AC
9. PFF19-1509BLK – Steering Rack Mounting Bush
With bushes not being available separately from Ford and the price of a new steering rack close to £500 + VAT, we are pleased to announce the release of our new PFF19-1509 Steering Rack Mounting Bush. Made from our stiffer Black 95A durometer material to increase stiffness over the OE rubber bush by approx. 33%, they provide a perfect balance of compliance, durability and performance, helping to restore steering precision, feel and straight-line accuracy.
OEM Part Number: 2644315 / K1BC-3A500-DE
OEM Part Number: 2272681 / K1BC-3A500-DD
OEM Part Number: 2491015 / K1BC-3A500-DC
10. PFR19-2210BLK – Rear Beam To Chassis Bush
Made using our Black 95A material to replace the soft rubber bushes, improving rear-end stability and handling.
OEM Part Number: 2167812 / H1BC-5K653-AD
26. PFF19-2226BLK – Lower Torque Mount, Track Use
Uses the same aluminium bracket and sleeve as PFF19-2226, but with our Black 95A durometer material increasing stiffness by a further 56%, for hard track and motorsport use.
OEM Part Number: 2470480 / M1T1-6P082-AA
27. PFF19-2227BLK – Lower Torque Mount Large Bush Insert
Made in our Black 95A material this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes: whilst reducing wheel-hop and improving the durability and longevity of the OE mount.
OEM Part Number: 2470480 / M1T1-6P082-AA
40. PFF19-2240BLK – Upper Engine Mount Insert
PFF19-2240BLK Upper Engine Mount Insert is made from our Black 95A material and works by stiffening the OEM mount reducing the amount of engine/trans roll during hard acceleration and gear changing for a more responsive feel. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 2238627 / K1BY-6F012-AB
41. PFF19-2230BLK – Upper Gearbox Mount Insert
PFF19-2230BLK Upper Gearbox Mount Insert is made from our Black 95A material and works by stiffening the OEM mount reducing the amount of engine/trans roll during hard acceleration and gear changing for a more responsive feel. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 2238631 / 2108080 / K1BY-7M121-AB
