3. PFF26-103-23.2BLK – Front Anti Roll Bar Bush 23.2mm
Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-22.5BLK – Front Anti Roll Bar Bush 22.5mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
3. PFF26-103-20BLK – Front Anti Roll Bar Bush 20mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 2T000
20. PFF26-122-12BLK – Lower Torque Mount – Motorsport
PFF26-122-12BLK Lower Torque Mount – Motorsport uses our Black 95A material for all bush components to maximise mount stiffness, resulting in a mega 1300% increase over the stock mount for uncompromising powertrain control for serious track and motorsports use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21950-CO000
20. PFF26-120BLK – Lower Torque Mount Bush – Motorsport
PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
21. PFF26-121-12BLK – Lower Torque Mount Small Bush 12mm
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
OEM Part Number: 21950-CO000
OEM Part Number: 21952-K9000
23. PFF26-123BLK – Upper Gearbox Mount Bush Insert
An easy-to-fit upgrade to limit movement within the upper gearbox mount, this Black 95A Durometer insert simply fits into the voiding within the mount and is secured in place with an included steel plate. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21830 S0000 / 21830 S0100
OEM Part Number: 21830 F2000 / 21830 G4100
OEM Part Number: 21830 J3000 / 21830-CO000 / 21830CO000
25. PFF26-225BLK – Upper Engine Mount Bush Insert
PFF26-225BLK Upper Engine Mount Insert is made in our hardest Black 95A durometer material for heavily tuned vehicles and track use for maximum strength and response. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled engine response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21810-C0000
30. PFF26-130BLK – Gear Shift Cable Bush Kit
To replace the small rubber bushes at the end of the gear linkages, these bushes are made from our Blac 95A Durometer polyurethane to give a stiff and precise gear-change.
OEM Part Number: 43794 S0100
