1. PFF26-101G – Front Wishbone Front Bush Camber Adjustable
Made from our Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5° of Camber adjustment for dialling in your wheel geometry. Fitting this bush may result in a small amount of caster change, so fitting PFF26-102G Front Wishbone Rear Bush Caster Adjust is recommended to neutralise or improve any caster change.
OEM Part Number: 54551 S0000
OEM Part Number: 54551 3X000
1. PFF26-101 – Front Wishbone Front Bush
Made from our Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering.
OEM Part Number: 54551 S0000
OEM Part Number: 54551 3X000
2. PFF26-102G – Front Wishbone Rear Bush Anti-Lift & Caster Adjust
Designed around our unique on-car adjustable Nylon/Polyurethane ball-joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.75° of caster adjustment with a supplied spanner to assist the fine-tuning of the vehicle’s suspension geometry. Optional washers are included to add anti-lift geometry, improving front wheel grip under acceleration. Fitting this bush may result in a small amount of camber change, so fitting PFF26-101G Front Wishbone Front Bush Camber Adjustable is recommended to neutralise or improve any camber change.
OEM Part Number: 54584 S0000
OEM Part Number: 54584 F2000
OEM Part Number: 54584 F2AA0
2. PFF26-102 – Front Wishbone Rear Bush
Using a steel outer shell and a Black 95A Durometer bush with a tapered bore, this bush reduces fore and aft movement of the wheel under acceleration and braking and reduces dynamic castor change during cornering, whilst allowing free articulation of the suspension arm.
OEM Part Number: 54584 S0000
OEM Part Number: 54584 F2000
OEM Part Number: 54584 F2AA0
3. PFF26-103-23.2 – Front Anti Roll Bar Bush 23.2mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-22.5 – Front Anti Roll Bar Bush 22.5mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-20 – Front Anti Roll Bar Bush 20mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 2T000
12. PFR26-112 – Rear Lower Rear Control Arm Bush
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over rear wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
OEM Part Number: 55230 S000
13. PFR26-113-19.3 – Rear Anti Roll Bar Bush 19.3mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti-roll bar diameter before ordering.
OEM Part Number: 55513 A2000
13. PFR26-113-15 – Rear Anti Roll Bar Bush 15mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 55513 3N200
15. PFR26-115 – Rear Trailing Arm Bush
Using a composite design with stainless steel, Black 95A and Purple 80A Durometer polyurethane: this bush improves stiffness and durability over the factory rubber bush for sharper turn-in and more precise rear axle control.
OEM Part Number: 55290 S0400
OEM Part Number: 55290 S0500
16. PFR26-116 – Rear Anti Roll Bar Drop Link Bush
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes.
OEM Part Number: 55530 G2000
19. PFR26-119 – Rear Upper and Lower Spring Isolator Pads
Designed to work with the OE spring as well as accept aftermarket springs, they are made from our Purple 80A durometer material to ensure they outlast the original rubber part equivalent without over-compressing, making them a must for your shopping list when renewing or upgrading your suspension.
OEM Part Number: 55360 G2000
OEM Part Number: 55370 C1100
20. PFF26-120P – Lower Torque Mount Bush – Fast Road/Track
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-120 – Lower Torque Mount Bush – Fast Road
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-120R – Lower Torque Mount Bush – Diesel
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-122P – Lower Torque Mount – Fast Road/Track
PFF26-122P Lower Torque Mount – Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-122 – Lower Torque Mount – Fast Road
PFF26-122 Lower Torque Mount – Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
21. PFF26-121 – Lower Torque Mount Small Bush 14mm
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
OEM Part Number: 21950 S0000
OEM Part Number: 21950 A5000
23. PFF26-123 – Upper Gearbox Mount Bush Insert
An easy-to-fit upgrade to limit movement within the upper gearbox mount, this Purple 80A Durometer insert simply fits into the voiding within the mount and is secured in place with an included steel plate. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21830 S0000 / 21830 S0100
OEM Part Number: 21830 F2000 / 21830 G4100
OEM Part Number: 21830 J3000 / 21830-CO000 / 21830CO000
25. PFF26-125 – Upper Engine Mount Bush Limiter
An easy-to-fit upgrade to limit movement within the upper engine mount. This Purple 80A Durometer insert simply fits into the voiding on the top of the mount and is secured in place with the original bolt. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience.
OEM Part Number: 21810 S0000 / 21810 S0100 / 21810 G4100
OEM Part Number: 21810 J7000 / 21810 J7200 / 21810 F2000
OEM Part Number: 21810 F2100 / 21810 G4000
