3. PFF26-103-23.2 – Front Anti Roll Bar Bush 23.2mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-22.5 – Front Anti Roll Bar Bush 22.5mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-20 – Front Anti Roll Bar Bush 20mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 2T000
20. PFF26-120P – Lower Torque Mount Bush – Fast Road/Track
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-120 – Lower Torque Mount Bush – Fast Road
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-120R – Lower Torque Mount Bush – Diesel
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-122-12P – Lower Torque Mount – Fast Road/Track
PFF26-122-12P Lower Torque Mount – Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21950-CO000
20. PFF26-122-12 – Lower Torque Mount – Fast Road
PFF26-122-12 Lower Torque Mount – Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21950-CO000
21. PFF26-121-12 – Lower Torque Mount Small Bush 12mm
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
OEM Part Number: 21950-CO000
OEM Part Number: 21952-K9000
23. PFF26-123 – Upper Gearbox Mount Bush Insert
An easy-to-fit upgrade to limit movement within the upper gearbox mount, this Purple 80A Durometer insert simply fits into the voiding within the mount and is secured in place with an included steel plate. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21830 S0000 / 21830 S0100
OEM Part Number: 21830 F2000 / 21830 G4100
OEM Part Number: 21830 J3000 / 21830-CO000 / 21830CO000
25. PFF26-225 – Upper Engine Mount Bush Insert
PFF26-225 Upper Engine Mount Insert is made in our Yellow 70A durometer material for increased mount longevity and performance. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled engine response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 21810-C0000
30. PFF26-130 – Gear Shift Cable Bush Kit
To replace the small rubber bushes at the end of the gear linkages, these bushes are made from our Purple 80A Durometer polyurethane to give a stiff and precise gear-change.
OEM Part Number: 43794 S0100
