1. PFF26-101G – Front Wishbone Front Bush Camber Adjustable
Made from our Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5° of Camber adjustment for dialling in your wheel geometry. Fitting this bush may result in a small amount of caster change, so fitting PFF26-102G Front Wishbone Rear Bush Caster Adjust is recommended to neutralise or improve any caster change.
OEM Part Number: 54551 S0000
OEM Part Number: 54551 3X000
1. PFF26-101 – Front Wishbone Front Bush
Made from our Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering.
OEM Part Number: 54551 S0000
OEM Part Number: 54551 3X000
3. PFF26-103-23.2 – Front Anti Roll Bar Bush 23.2mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-22.5 – Front Anti Roll Bar Bush 22.5mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-20 – Front Anti Roll Bar Bush 20mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 2T000
11. PFR26-111 – Rear Lower Front Control Arm Bush
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over toe geometry of the rear wheels. Includes steel fitting tools to support the pressed-steel arm during bush fitting. Does not fit the welded tubular arm fitted to fastback models.
OEM Part Number: 52740 G2100
OEM Part Number: 52740 F2AA0
13. PFR26-113-19.3 – Rear Anti Roll Bar Bush 19.3mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti-roll bar diameter before ordering.
OEM Part Number: 55513 A2000
13. PFR26-113-15 – Rear Anti Roll Bar Bush 15mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 55513 3N200
14. PFR26-114G – Rear Upper Control Arm Bush Camber Adjustable
Using a steel outer shell, our Black 95A Durometer polyurethane and a CNC machined stainless offset sleeve, this bush ensures long-lasting performance and control over rear wheel geometry. Each offset sleeve allows for +/-0.75° camber change on the rear wheels for dialing in your wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
OEM Part Number: 55130 G2000
14. PFR26-114 – Rear Upper Control Arm Bush
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over rear wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
OEM Part Number: 55130 G2000
15. PFR26-115 – Rear Trailing Arm Bush
Using a composite design with stainless steel, Black 95A and Purple 80A Durometer polyurethane: this bush improves stiffness and durability over the factory rubber bush for sharper turn-in and more precise rear axle control.
OEM Part Number: 55290 S0400
OEM Part Number: 55290 S0500
16. PFR26-116 – Rear Anti Roll Bar Drop Link Bush
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes.
OEM Part Number: 55530 G2000
19. PFR26-119 – Rear Upper and Lower Spring Isolator Pads
Designed to work with the OE spring as well as accept aftermarket springs, they are made from our Purple 80A durometer material to ensure they outlast the original rubber part equivalent without over-compressing, making them a must for your shopping list when renewing or upgrading your suspension.
OEM Part Number: 55360 G2000
OEM Part Number: 55370 C1100
