2. PFF76-902GBLK – Front Wishbone Rear Bush Anti-Lift & Caster Adjust
PFF76-902G Front Wishbone Rear Bush has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows up to 0.5° of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings and also includes 5mm anti-lift properties. Vertical stiffness is increased by 250% over standard rubber.
OEM Part Number: 48655-52100
OEM Part Number: 48068-52140
3. PFF76-403-24.2BLK – Front Anti-Roll Bar Bush 24.2 mm
95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits Circuit Pack equipped models with the upgraded 24.2mm bar.
OEM Part Number: 4880452010
3. PFF76-403-23.2BLK – Front Anti-Roll Bar Bush 23.2 mm
95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits standard models with a 23.2mm bar.
OEM Part Number: 4880452010
13. PFR76-413-21.3BLK – Rear Anti-Roll Bar Bush 21.3mm
95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits all models with a 21.3mm rear bar.
OEM Part Number: 4880552070
20. PFF76-920BLK – Lower Torque Mount Insert
PFF76-920BLK Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM torque mounting for performance on the race circuit or the rally stage. This reduces the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel, as well as reducing wheel-hop and improving traction. PFF76-920BLK can be fitted alone but will perform most effectively when fitted with our other powertrain inserts (PFF76-923BLK & PFF76-925BLK) as a full set. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 12363-18010
23. PFF76-923BLK – Upper Gearbox Mount Insert
PFF76-923BLK Upper Gearbox Mount Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM upper gearbox mounting for performance on the race circuit or the rally stage. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker.
We recommend fitting PFF76-923BLK alongside our other Yaris GR powertrain inserts (PFF76-920BLK & PFF76-925BLK), as they perform much more effectively as a full set. There will be an increase in NVH when fitting Black series inserts.
OEM Part Number: 12372-18010
25. PFF76-925BLK – Upper Engine Mount Insert
PFF76-925BLK Upper Engine Mount Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM upper engine mounting for performance on the race circuit or the rally stage. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker.
We recommend fitting PFF76-925BLK alongside our other Yaris GR powertrain inserts (PFF76-920BLK & PFF76-923BLK), as they perform much more effectively as a full set. There will be an increase in NVH when fitting Black series inserts.
OEM Part Number: 12305-18050
