1. PFF60-501G – Front Arm Front Bush Camber Adjustable
OEM Part Number: 8200242025
1. PFF60-501 – Front Arm Front Bush
OEM Part Number: 8200242025
2. PFF60-902G – Front Arm Rear Bush Caster Offset
PFF60-902G provides a fixed 4mm offset to provide +/- 0.5° caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902.
OEM Part Number: Arm = 545050794R / 545050399R
OEM Part Number: Arm = 8200586561 / 8200586567
2. PFF60-902 – Front Arm Rear Bush
OEM Part Number: Arm = 545050794R / 545050399R
OEM Part Number: Arm = 8200586561 / 8200586567
3. PFF60-703-22.5 – Front Anti Roll Bar Bush 22.5mm
This bush fits the bar and bracket fitted to post-2015 cars only. Please measure the anti-roll bar diameter before ordering.
OEM Part Number: 546112239R
10. PFR60-810 – Rear Beam Mounting Bush
OEM Part Number: 550455096R
20. PFF60-1420 – Upper Engine Mount Insert
Fits 1.6T RenaultSport Clios only. The original oil-filled engine mount softens and perishes with age, losing its ability to dampen effectively and promoting unwanted engine movement. By fitting our new insert into the voiding of the OE rubber bush, it acts as a buffer by restricting movement within the bush thus improving throttle response, sharpening gear changes, and reducing wheel hop. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis.
OEM Part Number: 113753629R
21. PFF60-1421 – Gearbox Mounting Bush Insert
PFF60-1421 Gearbox Mounting Bush Insert is a two-part kit that acts to stiffen the upper and lower voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF60-1420 Upper Engine Mount Insert and PFF60-1422 Lower Torque Mount
OEM Part Number: 112205217R
OEM Part Number: 112202847R
22. PFF60-1422P – Lower Torque Mount, Fast Road/Track
Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It’s also super easy to replace – just two bolts and it’s out with the old, in with the new and no pressing out of any rubber! PFF60-1422P Lower Engine Mount Bracket & Bushes (Purple 80A) is almost 300% stiffer than OE and recommended for higher powered cars used on the road/track.
OEM Part Number: 112385698R
OEM Part Number: 112383905R
22. PFF60-1422 – Lower Torque Mount, Fast Road
Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It’s also super easy to replace – just two bolts and it’s out with the old, in with the new and no pressing out of any rubber! PFF60-1422 Lower Engine Mount Bracket & Bushes (Yellow 70A) is over 100% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars.
OEM Part Number: 112385698R
OEM Part Number: 112383905R
