1. PFF85-201G – Front Wishbone Front Bush 30mm Camber Adjustable
PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501.
OEM Part Number: 357407182
OEM Part Number: 191407182
1. PFF85-201 – Front Wishbone Front Bush 30mm
If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G.
OEM Part Number: 357407182
OEM Part Number: 191407182
2. PFF85-2002 – Front Wishbone Rear Bush
PFF85-2002 Front Wishbone Rear Bush features a plated outer shell for a secure fitment in the wishbone and a better distribution of load under braking, and a chamfered sleeve to assist articulation and further improve performance and durability, making it a great upgrade for fast road cars or to replace the commonly worn OEM bush.
OEM Part Number: 2Q0407183
OEM Part Number: 2Q0407183B
10. PFR85-810 – Rear Beam Mounting Bush
OEM Part Number: 5Q0501541C
21. PFF85-1821R – Upper Engine Mount Insert, 3 Cylinder & Diesel
PFF85-1821R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822R Lower Engine Mount Insert and PFF85-1823R Gearbox Mount Insert.
OEM Part Number: 2Q0199262BF
21. PFF85-1821 – Upper Engine Mount Insert
PFF85-1821 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822 Lower Engine Mount Insert and PFF85-1823 Gearbox Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1821R.
OEM Part Number: 2Q0199262BF
22. PFF85-1822R – Lower Engine Mount Insert, 3 Cylinder & Diesel
PFF85-1822R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821R Upper Engine Mount Insert and PFF85-1823R Gearbox Mount Insert.
OEM Part Number: 2Q0199851D
OEM Part Number: 2Q0199851AH
22. PFF85-1822 – Lower Engine Mount Insert
PFF85-1822 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821 Upper Engine Mount Insert and PFF85-1823 Gearbox Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1821R. For 3 Cylinder & Diesel engines, please use PFF85-1822R.
OEM Part Number: 2Q0199851D
OEM Part Number: 2Q0199851AH
23. PFF85-1823R – Gearbox Mount Insert, 3 Cylinder & Diesel
PFF85-1823R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821R Upper Engine Mount Insert and PFF85-1822R Upper Engine Mount Insert.
OEM Part Number: 2Q0199555AH
23. PFF85-1823 – Gearbox Mount Insert
PFF85-1823 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821 Upper Engine Mount Insert and PFF85-1822 Lower Engine Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1823R.
OEM Part Number: 2Q0199555AH
