Powerflex-polyuretaanipuslat
Powerflex-puslilla korvaat heikot kumipuslat. Alustan puslat joutuvat erittäin kovan rasituksen alaiseksi. Puslien tarkoituksena on vaimentaa tukivarsien ja muiden alustan osien värinöiden ja rasitusten siirtymistä koriin. Puslien on oltava riittävän kovia estämään ei toivotut pyörän liikkeet. Powerflex-puslat on valmistettu polyuretaanista, joka mahdollistaa 25-30% jäykemmän rakenteen muiden ominaisuuksien silti kärsimättä.
-
Powerflex Road -polyuretaanipuslat – PFF19-2221
This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush.OEM Part Number: K1BY-6P082-ABOEM Part Number: K1BY-6P082-AC
Toimitusaika 1-2 viikkoa
42,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2222
Supplied as a Polyurethane bush and CNC machined bracket combination, the Purple 80A materials in PFF19-2222 suits fast road usage. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles.OEM Part Number: K1BY-6P082-ABOEM Part Number: 2386361 / K1BY-6P082-AC
Toimitusaika 1-2 viikkoa
186,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2223
PFF19-2223 is a complete replacement mount for the original engine mount. For an insert only please use PFF19-2225. Fits 1.0L Ecoboost manual and automatic models. The combination of bush material grades used in our Lower Torque Mount PFF19-2223 suits fast road use. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road. For the more spirited drive, PFF19-2223P is for fast road/track use using a stiffer combination of bushes. With this, the NVH is increased but improved control of wheel spin/hop is achieved. For dedicated track cars or for those who don’t mind a bit of additional NVH use PFF19-2223BLK for the ultimate in engine movement control. For ST models use PFF19-2222.OEM Part Number: H1BG-6P082-AC
Toimitusaika 1-2 viikkoa
188,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2223P
PFF19-2223 is a complete replacement mount for the original engine mount. For an insert only please use PFF19-2225. Fits 1.0L Ecoboost manual and automatic models. The combination of stiffer bush material grades used in our Lower Torque Mount, PFF19-2223P is for a more spirited drive more suited to fast road/track use. With this, there is a slight increase in NVH but improved control of wheel spin/hop is achieved. For fast road use on a car used daily, we would recommend PFF19-2223. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road. For dedicated track cars or for those who don’t mind additional NVH PFF19-2223BLK is for the ultimate in engine movement control. For ST models use PFF19-2223P.OEM Part Number: H1BG-6P082-AC
Toimitusaika 1-2 viikkoa
188,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2224
OEM Part Number: K1BY-6P082-ABOEM Part Number: K1BY-6P082-AC
Toimitusaika 2-3 arkipäivää
38,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2225
PFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only.OEM Part Number: H1BG-6P082-AC
Toimitusaika 1-2 viikkoa
38,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2226
Features a CNC machined and laser-etched aluminium bracket and sleeve, with our signature Purple 80A durometer bushes, increasing stiffness over the OE mount by up to 400% at maximum load.OEM Part Number: 2470480 / M1T1-6P082-AA
Toimitusaika 1-2 viikkoa
209,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2227
Made in our softer Red 65A durometer material in consideration of Ford’s 3-Cylinder engine, this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes, whilst reducing wheel-hop and improving the durability and longevity of the OE mount.OEM Part Number: 2470480 / M1T1-6P082-AA
Toimitusaika 1-2 viikkoa
38,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2230
PFF19-2230 Upper Gearbox Mount Insert is made from our Yellow 70A material and works by stiffening the OEM mount reducing the amount of engine/trans roll during hard acceleration and gear changing for a more responsive feel. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.OEM Part Number: 2238631 / 2108080 / K1BY-7M121-AB
Toimitusaika 1-2 viikkoa
42,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2231
PFF19-2231 Upper Gearbox Mount Insert is made in our Yellow 70A durometer material for increased transmission mount longevity and performance. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis.OEM Part Number: 2108074 / GN11-7M121-AC / GN11-7M121-CB
Toimitusaika 1-2 viikkoa
32,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2240
PFF19-2240 Upper Engine Mount Insert is made from our Yellow 70A material and works by stiffening the OEM mount reducing the amount of engine/trans roll during hard acceleration and gear changing for a more responsive feel. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.OEM Part Number: 2238627 / K1BY-6F012-AB
Toimitusaika 1-2 viikkoa
39,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-225-18
Toimitusaika 2-3 arkipäivää
57,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-225-26
Fits RS1600i Only.
Toimitusaika 1-2 viikkoa
57,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2302
PFF19-2302 allows free rotation of the wishbone to eliminate torsional twist of the bush, the common cause for failure with the OE rubber bush.OEM Part Number: 4T16-3042-AA / 4T16-3051-AA
Toimitusaika 1-2 viikkoa
95,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2525
PFF19-2525 Lower Engine Mount Insert is crafted from our Yellow 70ShA material and specifically engineered for petrol engines, or tuned diesel engines. Installing an insert into the upper portion of the voided cast rubber limits movement within the mount during acceleration and deceleration. By keeping the lower voided portion open, it limits the harmonic transfer of noise and vibration through the body of the vehicle, offering a perfect compromise between driving comfort and performance. The result is a restriction in engine movement, preventing wheel hop and offering more precise gear-shifting for a more positive driving experience. This, in turn, additionally prolongs the mount’s life expectancy. NB: When strengthening the connection between the engine and chassis, a small increase in NVH, usually at idle, should be expected. Naturally, the harder the material used, the greater the NVH transmitted.OEM Part Number: 2225817OEM Part Number: 5165988OEM Part Number: DS73-6P082-AE
Toimitusaika 1-2 viikkoa
30,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF19-2525R
PFF19-2525R Lower Engine Mount Insert (Diesel) is made using our softer Red 65ShA material for a more subtle absorption of the NVH associated with standard diesel engines or those with automatic transmissions. Installing an insert into the upper portion of the voided cast rubber limits movement within the mount during acceleration and deceleration. By keeping the lower voided portion open, it limits the harmonic transfer of noise and vibration through the body of the vehicle, offering a perfect compromise between driving comfort and performance. The result is a restriction in engine movement, preventing wheel hop and offering more precise gear-shifting for a more positive driving experience. This, in turn, additionally prolongs the mount’s life expectancy. NB: When strengthening the connection between the engine and chassis, a small increase in NVH, usually at idle, should be expected. Naturally, the harder the material used, the greater the NVH transmitted.OEM Part Number: 2225817OEM Part Number: 5165988OEM Part Number: DS73-6P082-AE
Toimitusaika 1-2 viikkoa
30,00 € Lisää ostoskoriin