Powerflex-polyuretaanipuslat
Powerflex-puslilla korvaat heikot kumipuslat. Alustan puslat joutuvat erittäin kovan rasituksen alaiseksi. Puslien tarkoituksena on vaimentaa tukivarsien ja muiden alustan osien värinöiden ja rasitusten siirtymistä koriin. Puslien on oltava riittävän kovia estämään ei toivotut pyörän liikkeet. Powerflex-puslat on valmistettu polyuretaanista, joka mahdollistaa 25-30% jäykemmän rakenteen muiden ominaisuuksien silti kärsimättä.
-
Powerflex Road -polyuretaanipuslat – PFF85-431
This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430.OEM Part Number: 1J0412331C
Toimitusaika 2-3 arkipäivää
120,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-431W
PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns. Fitting couldnt be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it! NB, fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431.OEM Part Number: 1J0412331C
Toimitusaika 1-2 viikkoa
52,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-440R
PFF85-440R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits:tSharper throttle responsetMore accurate gear changestReduced wheel-hoptImproved TractiontProlonged mount lifeOEM Part Number: 1JO 199 282 BF
Toimitusaika 1-2 viikkoa
37,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-441
PFF85-441 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for Petrol models and high-torque tuned Diesel models. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits – Sharper throttle response – More accurate gear changes – Reduced wheel-hop – Improved Traction – Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards.OEM Part Number: 1J019955 / 1J0 199 555
Toimitusaika 1-2 viikkoa
35,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-441R
PFF85-441R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits – Sharper throttle response – More accurate gear changes – Reduced wheel-hop – Improved Traction – Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards.OEM Part Number: 1J019955 / 1J0 199 555
Toimitusaika 1-2 viikkoa
37,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-501
For a camber adjustable bush use PFF85-501G.OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182AOEM Part Number: Arm = 1K0407152BG (Steel)OEM Part Number: Arm = 8J0407151D (Aluminium)
Toimitusaika 2-3 arkipäivää
92,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-501G
This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment.OEM Part Number: Bush = 1K0407182 / 5Q0407182 / 1K0407182AOEM Part Number: Arm = 1K0407152BG (Steel)OEM Part Number: Arm = 8J0407151D (Aluminium)
Toimitusaika 2-3 arkipäivää
169,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-502
OEM Part Number: 3C0199231 / 3C0199231E / 3C0199231FOEM Part Number: 1K0199231 / 1K0199231J / 1K0199232J
Toimitusaika 2-3 arkipäivää
106,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-502G
PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1° of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5° degrees of camber adjustment.OEM Part Number: 1K0199231J / 1K0199232JOEM Part Number: 1K0199231K / 1K0199232K
Toimitusaika 2-3 arkipäivää
272,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-502G-5
PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1° of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5° degrees of camber adjustment.OEM Part Number: 8J0199231OEM Part Number: 3C0199231D / 3C0199231E / 3C0199231FOEM Part Number: 1K0199231J
Toimitusaika 1-2 viikkoa
286,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-503-19.6
Please check anti roll bar diameter before orderingOEM Part Number: 1K0411303
Toimitusaika 2-3 arkipäivää
60,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-503-20
Please check anti roll bar diameter before orderingOEM Part Number: 1K0411303
Toimitusaika 2-3 arkipäivää
59,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-503-20.7
Please check anti roll bar diameter before orderingOEM Part Number: 1K0411303
Toimitusaika 1-2 viikkoa
60,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-503-21.7
Please check anti roll bar diameter before orderingOEM Part Number: 1K0411303
Toimitusaika 1-2 viikkoa
60,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-503-22
Please check anti roll bar diameter before orderingOEM Part Number: 1K0411303OEM Part Number: 1K0411303AQOEM Part Number: 3C0411303R
Toimitusaika 2-3 arkipäivää
60,00 € Lisää ostoskoriin -
Powerflex Road -polyuretaanipuslat – PFF85-503-22.5
Please check anti roll bar diameter before orderingOEM Part Number: 1K0411303
Toimitusaika 1-2 viikkoa
59,00 € Lisää ostoskoriin