Haku: C_DBADM_2404 Valid Test Simulator 🍕 Flexible C_DBADM_2404 Testing Engine 🟩 Reliable C_DBADM_2404 Test Book 🕒 Open “ www.pdfvce.com ” and search for 《 C_DBADM_2404 》 to download exam materials for free 🔒C_DBADM_2404 Test Sample Online
Haku: C_DBADM_2404 Valid Test Simulator 🍕 Flexible C_DBADM_2404 Testing Engine 🟩 Reliable C_DBADM_2404 Test Book 🕒 Open “ www.pdfvce.com ” and search for 《 C_DBADM_2404 》 to download exam materials for free 🔒C_DBADM_2404 Test Sample Online
Upper Right Engine Mounting Insert Petrol Fits 2.0 turbo and 2.2 litre petrol engines only. This is an insert that fits into the voids of the OE rubber bush.
Front Track Control Arm Outer Bush Fits Saab 900 GM models produced in 1994 only with a 45mm diameter. For 1995 to 1998 models use PFF66-301, which is a larger bush at 58mm diameter. 45mm
Front Radius Arm to Chassis Bush Caster Offset PFF5-6001G provides a fixed 6mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6001.
Sarjan hinta sisältää aina yhteen autoon tarvittavan määrän puslia
1. PFF1-601 Front Lower Arm Front Bush 2. PFF1-602 Front Lower Arm Rear Bush 3. PFF1-603 Front Anti Roll Bar End Link Mount To Arm Bush 4. PFR1-604 Rear Tie Bar To Hub Bush 5. PFR1-608 Rear Tie Bar To Chassis Bush 7. PFF1-606 Engine Mounting Small Bush (V6) 7. PFF1-607 Engine Mount to Stabiliser Small Bush (Twin Spark) 24. PFF1-605 Engine Mounting Stabiliser Large Bush 24. PFF1-824 Upper Right Engine Mount Bush
Lower Engine Mount Insert Fits Non-Abarth 1.2 & 1.4 lower engine mounts. This part fits into voids in original bush. Please check void pattern is the same as on your vehicle. For a complete mount use PFF16-530BLK.
Front Wishbone Front Bush 30mm Camber Adjustable PFF85-201G gives +/- 0.5 degrees of camber adjustment. If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger (nonadjustable) 45mm bush PFF3-501. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a non-offset version of this bush please use PFF85-201.Knurled end faces prevent sleeve rotation to retain suspension geometry.PFF85-201G boosts stiffness over the original part by 15%. 30mm
Rear Arm Inner Bush, Adjustable Allows adjustment of rear camber and toe, use with PFR85-1310GBLK. Camber adjustment of +/- 1.0 degree when using both PFR85-1310GBLK and PFR85-1311GBLK bushes. For a non adjustable bush use PFR85-1311BLK.