Haku: C_DBADM_2404 Valid Test Simulator 🍕 Flexible C_DBADM_2404 Testing Engine 🟩 Reliable C_DBADM_2404 Test Book 🕒 Open “ www.pdfvce.com ” and search for 《 C_DBADM_2404 》 to download exam materials for free 🔒C_DBADM_2404 Test Sample Online
Haku: C_DBADM_2404 Valid Test Simulator 🍕 Flexible C_DBADM_2404 Testing Engine 🟩 Reliable C_DBADM_2404 Test Book 🕒 Open “ www.pdfvce.com ” and search for 《 C_DBADM_2404 》 to download exam materials for free 🔒C_DBADM_2404 Test Sample Online
Rear Upper Wishbone Bush This bush fits arms with a hole diameter of 35mm and a length of 47mm, for arms with a 42mm hole diameter and length of 57mm use PFR25-209. 35mm diameter
Rear Upper Wishbone Bush This bush fits arms with a hole diameter of 42mm and a length of 57mm, for arms with a 35mm hole diameter and length of 47mm use PFR25-210. 42mm diameter
Volvo V60 II, myös R-Design & AWD, poislukien Four-C, CrossC
Etuakselimassa lähtien 1141 kg. Ei autoihin, joissa automaattinen tasonsäätö.
Vuosimalli: 10-05.19
Madallus edessä / takana:30 / 30
Huomioi seuraavat asiat:
Riippuen autojen varustetasoista, mahdollisesta tehtaan madalletusta sport-alustasta ja muista eroavaisuuksista voi madallus vaihdella ilmoitetusta. Valmistajan ilmoittamaa madallusta verrataan aina uuteen autoon.
Madallus edessä riippuu varustetasosta ja moottorin painosta
Ei autoihin, joissa automaattinen ajokorkeudensäätö
Front Eye Bolt Mounting Bush 10mm Bushes fit eye bolt mounting either side of where it passes through the wishbone. PFF85-208-10 is suitable for links with a 10mm diameter shaft which uses an M8 nut to hold the bushes in position. A lot of the pattern replacement links are now coming with the 10mm shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models. 10mm
Rear Lower Arm Bush PFR46-203 fit the 200SX S13 & Skyline R32 Models only – Bush length is 45mm with an OD of 33mm. For S14/S15 & R33/R34 use PFR46-210 – Bush length 50mm with an OD of 31.25mm.
Front Upper Wishbone Bush This part suits cast steel arms found on the Range Rover Sport (2005-2013), for pressed steel arms use PFF32-406 and PFF32-407.
Front Anti Roll Bar To Link Arm Bush 18mm This part is designed to fit front anti-roll bar end link with 18mm diameter size. Please check the anti-roll bar end link size before ordering. 18