1. PFF80-1101BLK – Front Wishbone Front Bush
OEM Part Number: 13260666 / 352308
OEM Part Number: C14771 / D14771
2. PFF80-1702BLK – Front Wishbone Rear Bush
Made from our Black 95ShA Polyurethane material, these bushes are supplied with a CNC-machined outer shell, stainless-steel sleeve and supporting washers. Its design features a tapered bore, allowing for the required articulation while limiting deflection under acceleration and braking.
OEM Part Number: Fiat/Alfa Wishbone: 51895366 / 51895367 / 51783056 / 51783057 / 51892272 / 51892273
OEM Part Number: Vauxhall-Opel Wishbone: 352864 / 13167940
2. PFF80-1102GBLK – Front Wishbone Rear Bush Caster Adjustable
PFF80-1102GBLK Front Wishbone Rear Bush Caster Adjustable has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0° of caster adjustment with the supplied spanner, to assist in the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased considerably over standard rubber.
OEM Part Number: Fiat/Alfa Wishbone: 51895366 / 51895367 / 51783056 / 51783057 / 51892272 / 51892273
OEM Part Number: Vauxhall-Opel Wishbone: 352864 / 13167940
10. PFR80-1110BLK – Rear Beam Mounting Bush
OEM Part Number: 13251590
OEM Part Number: 0402538 / 5131.G8
OEM Part Number: 51783623 / 51804552
25. PFF1-1125BLK – Upper Engine Mount Insert
This insert is made in our hardest Black 95A durometer material for heavily tuned vehicles and track use for maximum strength and response. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes and throttle application by stiffening and supporting the often perished rubber, a common failure on tuned vehicles. This supports a more precise and settled transmission response during acceleration and deceleration. This new part combines perfectly with our other Upper Gearbox Mounts and Lower Gearbox Mounts for greater engine stability. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 51813198 / 50515482 / 50508653 / 55700654 / 51815197 / 51980334
OEM Part Number: 13130741 / 13130739 / 13427217 / 9552231 / 95510419
OEM Part Number: 13130748 / 13234017 / 13130741 / 13267197 / 13427216
30. PFF1-1130BLK – Upper Gearbox Mount Insert
PFF1-1130BLK Lower Engine Mount Insert is made in our hardest Black 95A durometer material for heavily tuned vehicles and track use for maximum strength and response. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted.
OEM Part Number: 50518779 / 55702833 / 95510399
OEM Part Number: 55700434 / 51838875 / 51761609
OEM Part Number: 1807GR / 1807GL / 1807KF
