1. PFF26-101G – Front Wishbone Front Bush Camber Adjustable
Made from our Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5° of Camber adjustment for dialling in your wheel geometry. Fitting this bush may result in a small amount of caster change, so fitting PFF26-102G Front Wishbone Rear Bush Caster Adjust is recommended to neutralise or improve any caster change.
OEM Part Number: 54551 S0000
OEM Part Number: 54551 3X000
1. PFF26-101 – Front Wishbone Front Bush
Made from our Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering.
OEM Part Number: 54551 S0000
OEM Part Number: 54551 3X000
3. PFF26-103-23.2 – Front Anti Roll Bar Bush 23.2mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-22.5 – Front Anti Roll Bar Bush 22.5mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 3S110
3. PFF26-103-20 – Front Anti Roll Bar Bush 20mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 54813 2T000
13. PFR26-113-19.3 – Rear Anti Roll Bar Bush 19.3mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti-roll bar diameter before ordering.
OEM Part Number: 55513 A2000
13. PFR26-113-15 – Rear Anti Roll Bar Bush 15mm
Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled: and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
OEM Part Number: 55513 3N200
20. PFF26-120P – Lower Torque Mount Bush – Fast Road/Track
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-120 – Lower Torque Mount Bush – Fast Road
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-120R – Lower Torque Mount Bush – Diesel
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-122P – Lower Torque Mount – Fast Road/Track
PFF26-122P Lower Torque Mount – Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
20. PFF26-122 – Lower Torque Mount – Fast Road
PFF26-122 Lower Torque Mount – Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability.
OEM Part Number: 21950-S000
OEM Part Number: 21950A-5000
21. PFF26-121 – Lower Torque Mount Small Bush 14mm
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
OEM Part Number: 21950 S0000
OEM Part Number: 21950 A5000
